top of page

S. Fatima, PhD

Centre for Automotive Research and Tribology
Assistant Professor
Indian Institute of Technology Delhi
Google Scholar.png

Publications

Google Scholar Link
  • Google Scholar
Conference Proceedings

  1. R. K. Mishra, T. Mian, S. Fatima, A. R. Mohanty, and B. K. Panigrahi, “Motor and Bearing Multi-fault Diagnosis with Sound Quality Metrics" in 52nd International Congress and Exposition on Noise Control Engineering (Internoise 2023), Vol-268(8), pp-57-67, Chiba, Japan, 2023.

  2. S. Jaish, J. Mago, A. Negi, S. Fatima, “Investigation of Vibration Damping Characteristics of Natural Rubber Composites Reinforced with Waste Carbonaceous Fillers" in 52nd International Congress and Exposition on Noise Control Engineering (Internoise 2023), Vol. 268(3), pp-5378-5385, Chiba, Japan, 2023.

  3. Amar Kumar Verma, S. Fatima, B. K. Panigrahi, 2023, A reliable framework for predicting wind turbine failures utilising SCADA and Alarm data, 5th International Conference on System Reliability and Safety Engineering (SRSE), Beijing, China, 20-23 October 2023.

  4. Anurag Choudhary, Tauheed Mian, S. Fatima, 2023, Thermography-Based Fault Identification in Induction Motor Across Dynamic Speed Conditions, IECON 2023-49th Annual Conference of the IEEE Industrial Electronics Society, Singapore, 16-19 October 2023. 

  5. R. K. Mishra, A. Choudhary, S. Fatima, A. R. Mohanty, and B. K. Panigrahi, Realistic Condition-based Anomaly Detection of Multi-faults in Rotating Machines, in 3rd International Conference on Sustainable Energy and Future Electric transportation (SEFET), Bhubaneswar, India, pp.-1-6, 9-12, Aug 2023.

  6. T. Mian, A. Choudhary, S. Fatima, B.K. Panigrahi, 2023, Mel-spectrogram Based Approach for Fault Detection in Bearing using Convolutional Neural Network, The 6th International Conference on Electronics, Communications, and Control Engineering (ICECC23), Fukuoka Institute of Technology, Fukuoka, Japan, March 24-26, 2023. 

  7. A. Choudhary, T. Mian, S. Fatima, B.K. Panigrahi, 2023, Multi-Sensor based Bearing Fault Diagnosis of Switched Reluctance Motor for Electric Vehicle, The 6th International Conference on Electronics, Communications, and Control Engineering (ICECC23), Fukuoka Institute of Technology, Fukuoka, Japan, March 24-26, 2023. 

  8. Sunali, J. Mago, A. Negi, and S. Fatima, Sound Insulation Performance of Composites Developed using Waste Carbonaceous Materials, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Feb. 2023, vol. 265, no. 3, pp. 4055–4060, 21-24, Aug 2022.

  9. J. Mago, Sunali, A. Negi, and S. Fatima, Sound Insulation Property of Waste Jute Fiber/Recycled High-Density Polyethene Composites, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, vol. 265, no. 4, pp. 3549–3558, 21-24, Aug 2022.

  10. A. Choudhary, S. Fatima and B. K. Panigrahi, Passive Thermal Imaging-based Fault Detection in Induction Motor Under Varying Speed Conditions, 2022 IEEE 2nd International Conference on Sustainable Energy and Future Electric Transportation (SeFeT), 4-6, Aug 2022.

  11. T. Mian, A. Choudhary, S. Fatima, Sound Signal Based Gear Fault Diagnosis Under Varying Working Conditions, 28th International Congress on Sound and Vibration (ICSV28), Singapore, 24-28, July 2022.

  12. R. K. Mishra, A. Choudhary, A. R. Mohanty and S. Fatima, A Comparative Study of Time-Frequency Analysis for The Application of Fault Diagnosis System, 28th International Congress on Sound and Vibration (ICSV28), Singapore, 24-28, July 2022.

  13. A. Choudhary, R.K. Mishra, S. Fatima, B. K. Panigrahi, Fault Diagnosis of Induction Motor Under Varying Operating Condition, IEEE Conference on Emerging Technologies (GlobConET-2022), Arad, Romania, May 20-21, 2022.

  14. R. K. Mishra, A. Choudhary, A. R. Mohanty and S. Fatima, Performance Evaluation of Support Vector Machine for System Level Multi-fault Diagnosis, 2022 Prognostics and Health Management Conference (PHM-2022), London, UK, 27-29 May 2022.

  15. A. Negi, A. K. Kumar, E. Ahmad, M. A. Haider, and S. Fatima, Bio-renewable Acoustic Materials from NADES Pre-treated Agro-cellulose Microfibrils, ACS Spring, San Diego, California, 20-24 March 2022.

  16. T. Mian, A. Choudhary, S. Fatima, 2022, Multi-Sensor Fault Diagnosis for Misalignment and Unbalance Detection Using Machine Learning, IEEE International Conference on Power Electronics, Smart Grid, and Renewable Energy (PESGRE-22), Trivandrum, Kerala, 2-5 January 2022.

  17. A. Negi, A. K. Kumar, E. Ahmad, M. A. Haider, and S. Fatima, A Process to Utilize Rice Straw for High-value Acoustics Applications, AIChE Annual Meeting, 7-19 November 2021.

  18. R. K. Mishra, A. Choudhary, A.R. Mohanty, S. Fatima, 2021, Multi-domain Bearing Fault Diagnosis using Support Vector Machine, IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON-2021), Kuala Lumpur, Malaysia, 24-26 September 2021.

  19. A. Negi, A. K. Kumar, E. Ahmad, M. A. Haider, and S. Fatima, Noise Control Applications of Cellulosic Microfibrils Pretreated through Natural Deep Eutectic Solvents, ACS Fall, 22-26 August 2021.

  20. M. Raj, S. Fatima and N. Tandon, 2020, A comparative performance simulation of natural and synthetic sound absorbers in room acoustic applications, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, Institute of Noise Control Engineering.

  21. M. Raj, S. Fatima and N. Tandon, 2019, Acoustical Properties of Denim Shoddy Based Recycled Material, INTER-NOISE 2019, 48th International Congress and Exhibition on Noise Control Engineering, Madrid, Spain.

  22. M. Raj, S. Fatima, N. Tandon, “Acoustical Properties of Jute Felt Sintered with Cotton Shoddy, 47th National Symposium on Acoustics (NSA 2019), Ravenshaw University, Cuttack,17-19 October 2019.

  23. M. Raj, S. Saini, S. Fatima and N. Tandon, 2019, Condition Monitoring of a Centrifugal Pump by Vibration and Motor Current Signature Analysis, 10th International Conference on Industrial Tribology, Indian Institute of Science, Bangalore.

  24. M. Raj, S. Varghese, S. Fatima and D. Kumar, 2019, Exploring the Performance of Rice Straw-Poly Propylene Composites for Vibration Isolation Application, 10th International Conference on Industrial Tribology, Indian Institute of Science, Bangalore.

  25. M. Raj, S. Fatima and N. Tandon, Measure Sound Absorption Coefficient Of Materials, 2018, 13th Western Pacific Conference on Acoustics ( WESPAC 2018), CSIR- NPL, New Delhi.

  26. N. R. Singh, H. Kumar, N. Tandon and S. Fatima, Detection of Airgap Eccentricity and Broken Rotor Bar faults In a Motor Using Vibration Signature Analysis, 2018,  13th Western Pacific Conference on Acoustics (WESPAC-2018), CSIR-NPL, New Delhi, India.

  27. H. Kumar, N. Tandon and S. Fatima, 2018, Condition Based Monitoring Of Fan Using Vibration Analysis, 13th Western Pacific Conference on Acoustics (WESPAC-2018), CSIR-NPL, New Delhi.

  28. A. R. Mohanty and S. Fatima, 2018, Noise Control of a Diesel locomotive for Indian Railway, Inter-Noise 2018, 26th to 29th August, Chicago, Illinois.

  29. M. Raj, S. Fatima and N. Tandon, 2017, Prediction of Acoustical performance with and without Airflow Resistivity of Fibrous Natural Materials, 46th National Symposium on Acoustics, Mechanical Engineering Department, 28-30 October, Aligarh.

  30. S. Sing, M. Kulthe, S. Fatima and A. R. Mohanty, 2016, Misfiring Identification of a Petrol Engine using Sound Quality Metrics, International symposium on Acoustics for Engineering Applications, 17-19 November 2016, KIIT Gurgaon.

  31. S. Fatima and A. R. Mohanty, 2016, Acoustical Characterization of Bulk Natural Fibrous Material using Flow Resistivity, InterNOISE 2016, 21-24 August, Hamburg, Germany.

  32. A. R. Mohanty and S. Fatima, 2016,  Improvement of interior acoustics and speech quality of small office using natural material, InterNOISE 2016, Hamburg, Germany.

  33. S. Fatima and J. Stuart Bolton, 2015,  Effect of Orientation of Fibers on the Acoustical Properties of a Natural Material, InterNOISE 2015, San Francisco, USA.

  34. A. Chattopadhyay, S. Fatima and A. R. Mohanty,2013,  A case study of Virtual laboratory on IC engine, Proceeding of 2nd KIIt international Symposium on Advances in Automotive Technology 2013, 41-44.

  35. S. Fatima, A. R. Mohanty and V.N.A. Naikan, 2013,  Effective time domain features for distinguishing coupling effects on misaligned shaft, Proceedings of the Acoustics 2013 New Delhi, November 10-15.

  36. K. Pruthvi Kumar Reddy, S. Fatima and A. R. Mohanty, 2013, Sound quality considerations in the design of engine exhaust mufflers, Proceedings of the Acoustics 2013 New Delhi, November 10-15.

  37. S. Fatima, A. R. Mohanty and V. N. A.  Naikan, 2013, Most Effective Transducer Locations for Permanent Health Monitoring of a Rotating Machine, Proceedings of the 20th International Congress on Sound and Vibration Bangkok, Thailand, July 7-11.

  38. S. Fatima, A. R. Mohanty, Sushil Paradhe and  S. T. Tamizharasan, 2013, Vibro- Acoustic Source Path Characterization of a Domestic Refrigerator, Proceedings of the 20th International Congress on Sound and Vibration Bangkok, Thailand, July 7-11.

  39. S. Fatima and A. R. Mohanty, 2013, Effect of Pre-treatment Process on the Mechanical Strength and Transmission Loss Characteristics of Jute Fabric Composites, Proceedings of the 20th International Congress on Sound and Vibration Bangkok, Thailand, July 7-11.

  40. S. Fatima and A. R. Mohanty, 2011, Application of Biodegradable Composite Jute Materials for Noise Control in House Hold Appliances, Proceedings of the International Conference on Advances in Materials and Materials Processing, IIT Kharagpur, December 9-11.

  41. S. Fatima, Manish Kulthe and A. R. Mohanty, 2011, Prediction of Sound absorption Behaviors of Ni-Cr Metal Foam, Proceedings of the International Conference on Advances in Materials and Materials Processing, IIT Kharagpur, December 9-11.

  42. A. R. Mohanty and S. Fatima, 2010, Jute as an Acoustical Material for Noise Control of a Domestic Dryer, Proceedings of the 17th International Congress on Sound and Vibration, Cairo, July 18-22.

bottom of page